06. February 2020 · Comments Off on Smart Ideas: Revisited · Categories: Advertising & Marketing

Everything You Need to Know about Replacing Kitchen Faucet

Homeowners are usually expected to keep everything regarding the house ranging from plumbing to electrical are in perfect working condition. It is usually costly to rely on experts to keep a house up and running. Using some heating tips and DIY approach, you can avoid the cost of hiring the professionals. If your kitchen faucet is damaged, you should not worry about finding professionals to help as you can replace it yourself. It is costly to have a leaking faucet as you will spend more on water bills. There is no need to wait for a plumber if you can resolve the issue. Some of the vital parts that you should know include spout, aerator, and handle and read more here on heating tips. The article herein is a DIY guide on how to replace kitchen faucet with the help of other heating tips.

In as much as you will need certain tools for the job, you can do it yourself. First, you should separate the job into two phases; removing the old faucet and replacing it with a new one. In the removal process, you will start by closing the valves. Below the sink, you will find knobs that you should turn to close the valves. As soon as you close the valves, you should turn on the faucet to get rid of the existing pressure. Always ensure that your faucet is on.

The next step is unscrewing the nuts of the water lines with the help of an adjustable wrench. When the nuts get to lose that you can turn them with your fingers, you should remove the holes from the old faucet. The other tool that you will need to remove the nuts from the faucet is a basin wrench. In this case, you will need an extra pair of hands to hold the faucet from about the sink. Finally, pull out the faucet from the sink once the nuts are completely loose.

In the replacement part, you should assemble the new faucet. Using the assembling manual that is provided, this will be a simple task. A mistake in the assembling process can damage your new faucet hence you should be careful. Once the faucet is ready for installation, you should cover all the holes using trimming rims and deck plates. Once you cover all the holes, you should insert the supply tubes and connect them to the right places. After that, tighten the nuts using a basin wrench.

The last step is linking the holes to the water lines. The solution to leakages is usually wrapping Teflon tape around the connection. You will need heating tips if you have a hot-and-cold faucet to avoid mixing the lines. If you follow this guide and have some heating tips in mind, you will not have to worry about hiring an expert to help with the replacement of your kitchen faucet.

Cite: this link

Comments closed